Guided Tour of MERL March 2023

Guided Tour of Museum of English Rural Life (MERL) March 2023

The Museum of English Rural Life (MERL) is a museum, library and archive dedicated to recording the changing face of farming and the countryside in England. It is run by the University of Reading and is situated near to the centre of Reading on Redlands Road. We were met by Susanna and two volunteer guides Jenny and Kaye who would be with us for the duration of our stay. The main museum building was originally Thorpe House designed for Alfred Palmer of Huntley & Palmers a locally based biscuit manufacturer in 1880. Palmer was an important benefactor to the community and over the years the house was extended and became a woman’s hall of residence. The Museum itself was founded in 1951 and grew out of the university’s long academic connections with agriculture. It has been extended over the years since and it underwent further redevelopment from 20123 – 2016 funded by the Heritage Lottery Fund, The Wellcome Trust and the University.

The Museum houses designated collections of national importance that span the full range of objects, archives, photographs, film and books. It is also the location of the University of Reading’s special collections archive, housing hundreds of collections of rare books, manuscripts, typescripts and other objects of importance. The collections hold over 25,000 objects, almost all of which are on display, and which provide a material record of rural England covering 1750 to the present day. It cares for a collection of livestock portraiture, representations of rural life, agricultural hand tools, ploughs, farm machinery, sewing machines and other equipment. The museum has a specialist library and houses other collections including the library of the Tools and Trades History Society.

We were given an introduction to the Museum and then Jenny and Kaye spoke about the main subject they would be covering “ The Swing Riots”.

The Swing Riots were a widespread uprising in 1830 by agricultural workers in southern and eastern England in protest of agricultural mechanisation and harsh working conditions. It began with the destruction of threshing machines in the Elham Valley area of East Kent in the summer of 1830 and by early December had spread through the whole of southern England and East Anglia.

The first threshing machines were destroyed on 28th August 1830. These were hugely unpopular as they displaced workers and drove down wages. The protesters went from farm to farm threatening farmers, demanding money and food in “payment” before destroying agricultural machinery.

The name “Swing Riots” was derived from Captain Swing, the fictitious name often signed to the threatening letters sent to farmers, magistrates, parsons and others. He was regarded as the mythical figurehead of the movement. (‘Swing’ was apparently a reference to the swinging stick of the flail used in hand threshing.)

The riots causes were a combination of a number of factors:

  1. The availability of labourers after the return to peace after the relative end to wars at the end of the Napoleonic era.
  2. Between 1770 and 1830, about 6 million acres of common land were enclosed and the land was now divided up among the large local landowners, leaving the landless farmworkers solely dependent upon working for their richer neighbours for a cash wage.
  3. The final straw was the introduction of the horse – powered threshing machines which could do the work of many men.

The riots spread throughout the country with sixty percent of the disturbances concentrated in the south (Berkshire 165 incidents, Hampshire 208, Kent 154, Sussex 145, Wiltshire 208); East Anglia had fewer incidents (Cambridge 17, Norfolk 88, Suffolk 40); and the Southwest, the Midlands and the North were only marginally affected.

The landowning class in England felt severely threatened by the riots and responded with harsh punitive measures. Nearly 2,000 protesters were brought to trial in 1830–1831, 252 were sentenced to death (though only 19 were actually hanged), 644 were imprisoned and 481 were transported to penal colonies in Australia. Not all rioters were farm workers since the list of those punished included rural artisans, shoemakers, carpenters, wheelwrights, blacksmiths and cobblers. One of those hanged was reported to have been charged only because he had knocked the hat off the head of a member of the Baring banking family. Many of the protesters who were transported had their sentences remitted in 1835.

The riots were a major influence on the Whig government. They added to the strong social, political and agricultural unrest throughout Britain in the 1830s, encouraging a wider demand for political reform, culminating in the introduction of the Great Reform Act, 1832. The act was the first of several reforms that over the course of a century transformed the British political system from one based on privilege and corruption to one based on universal suffrage and the secret ballot.

After Jenny and Kaye had finished their talk we were shown around the welcome area and the 10 galleries of the museum (https://merl.reading.ac.uk/visit-us/interactive-maps-and-galleries/ ). Each has a theme and thousands of many fascinating objects are on view, many of which were familiar to many of our members but have long since fallen out of everyday use. There are also a lot of interesting online exhibitions and  a full digital catalogue of all their exhibits available free to the public ( https://merl.reading.ac.uk/merl-collections/search-and-browse/collections-a-z/ ). We then were left to our own devices for about an hour where we explored the galleries further or had a cup of tea and a cake from the small café. Particularly favourite exhibits were the many varied wooden carts from various parts of the country and the collection of Ladybird children’s books on display . The Ladybird gallery is the only permanent exhibition space in the world dedicated to the iconic Lady Bird books and the museum holds an archive of 20,000 illustrations that were created for them ( https://merl.reading.ac.uk/visit-us/galleries/the-ladybird-gallery/ ).

One other treasure of the museum is a series of wall hangings created for the 1951 Festival of Britain. The Museum only has space to show one of these at any one time which was a shame.

After completing our visit, we headed to the 4 Horseshoes at Sherfield on Loddon and then home to Andover. Once again thanks to Robert Kemp for making the day possible by driving the minibus.

Questers’ Visit to Diamond Light

Our party was greeted by Amy who manages all visits amongst many other functions, and we were first directed to their relatively luxurious canteen for a reviving cup. The 2-hour guided tour commenced with a short history and function of the synchrotron, and we realised just how fortunate we were to be able to secure the only general visit available this year to Diamond Light at Harwell which is the UK’s national Synchrotron science facility.

Under the huge doughnut shaped roof electrons are accelerated to near the speed of light, emitting a stream of light which is many million times brighter than the sun. The electrons are directed into what they call ‘beam lines’ and are then used to conduct at sub-atomic level experiments/investigations into various engineering, medical, metallurgical, chemical, biological, veterinary, archaeological, etc problems.

Because it is a ‘not for profit’ organisation, much of the work is basic research in co-operation with universities around the world (but very often Oxford) which must be published so that mankind may benefit from the discoveries made. It is the UK’s contribution to a genuinely international enterprise, and it was no surprise to learn that the 740+ staff were recruited from 43 different nationalities.

Some 10% of their work is confidential and conducted for commercial companies who retain the information and we saw a portion of a very large hollow fan blade as used in the latest engines by Rolls-Royce. Apparently, the company wished to know how the outer surface of the blade reacted to certain load conditions. This information was provided after an investigation by Diamond Light.

At each of the 33 beam lines located at tangents around the outer periphery of the of the beam accelerator we saw descriptions of the research project being undertaken. Of particular interest was the continuing investigations into Cov2 type viruses with the ultimate intention to try to develop a new vaccine which will be effective against all future mutations. This same technology could also be used to combat the influenza virus which mutates every year and currently requires annual immunisation. We noted several other beam lines were conducting other investigations into such diseases as Parkinson’s and cancer.
Several advance technology companies have offices close to Diamond Light (as shown in the attached photo) and they, presumably, utilise their facilities on a regular basis. The present accelerator is now some 20 years old and must be replaced. Components are currently being manufactured and the accelerator will be closed for about a year in the autumn whilst the new one is being constructed. The intention being to maintain our leading role at the cutting edge of a number of scientific disciplines.

This proved to be one of the most interesting visits organised for the Questers group and the necessarily limited number of attendees found all aspects to be fascinating. Our thanks, as usual to Robert our mini-bus driver for safe delivery and return.

Norma Bryan

Questers’ Visit to Stannah

On December 8th 12 of us met at the Andover Headquarters of Stannah at the Portway Estate. This was an oversubscribed trip because numbers were limited by the company due to the factory floor being a working environment.
We were greeted on arrival with a welcome hot coffee in an area overlooking the factory floor and then taken to a training room for an introduction given by Andy Hasilow, Managing Director, followed by a presentation from the Manufacturing Manager Martin Cannon.
Martin told us that this family owned and run company began in London in 1867 when it was manufacturing lifts and cranes for the capital’s docks and by 1900 was also producing passenger lifts. The last 3 pandemic years had been very challenging and had caused the company to make major changes with a growth target set to reach £500 million by 2027
‘Pop’ was the third generation of the Stannah family and it is Pop’s sons who are co-chairs in the company today. Five family members are still active with the 5th generation becoming involved. The company has a scheme enabling every employee to take an equal share of a percentage of annual profit so that the lowest paid and highest paid are rewarded equally . The company can boast a loyal staff with many family members working for them. We were also told that apprenticeship schemes and further education and training at all levels is supported.
Following WW 2 when the London factory was destroyed, Stannah moved to Andover where it has three manufacturing sites in the town and is currently building a vast world class production facility on the Andover Business Park. This will be ready for use in early 2024 when the Anton Mill and Stephenson factories will be shut and moved to the new development. Whilst many people associate Stannah with stair lifts they also make commercial lifts, platforms and escalators and have a major contract with Network Rail among others for these. Stannah has 11 subsidiaries in 43 countries worldwide and manufacturing centres in Newcastle (UK) the Czech Republic and most recently in the USA.
For the planned growth, Stannah will recruit and train local people, currently they employ around 600 from Andover and its surrounding areas. The factory runs on a three-shift basis 7 days a week meaning that domestic stair lift production can be completed within a week from the date of the order. The rails supporting the chair must be manufactured to individual orders because no two staircases are the same, even in identical houses. The company uses its own workers for the installation and is proud of its reputation for speed of completion.
Martin was joined by Stephanie, the Supply Chain Director, and we split into two groups for the factory floor tour and the display/ demonstration centre for domestic lifts and stair lifts. We followed the production line from the arrival of sheet metal to the welding and casting of plates, the powder coating of components [click images to enlarge}

 

The final part of the production line is where the testing (for weight bearing ) of the chairs takes place before they are packed ready for distribution. There was time to try out various stair lift designs and ride in a domestic lift before being treated to a very generous lunch.

 

Before giving our thanks and leaving we were each given a notebook and pen/ruler/spirit level and had a group photograph beside a chair with upholstery designed for Christmas!
Jane Leishman